3PU
IEC 60309-1* IEC 60529 IEC 50102 * (when applicable)
Latch single-pole polyamid connector for Industry
- Amp. max. : 800A
- Voltage max. : 1,5kV / 110V
- Amp. pilots : 16A
- Contacts max. : 1P+2p
- Cable section max. : 300 mm² (600 MCM)
- Cable diameter : min. 8 mm / max. 38 mm
- Pilot section : 2,5 mm² (AWG 14)
- Termination : to crimp or side screw terminal
- Casing : Polyamid
- Contacts : Silver plated copper
- Insert : Polyamid
- Fastenings : Stainless steel
- Temperature : -30° +60° C
- Ind. protection : IP66 - IK8
Connectors
SOCKET
Active part to be placed wall-mounted or on an electrical cabinet.
Instead of crimping terminals
PLUG
Mobile connector to be cabled and connected in a socket or a cable coupler. The plug cap options are needed to ensure IP66 once disconnected.
Go to options
CABLE COUPLER
Mobile socket to be cabled and connected in a plug used to make an extension line.
Go to options
APPLIANCE INLET
Connector to be placed wall-mounted or on an electrical cabinet. The plug cap option is needed to ensure IP66 when not connected.
Instead of crimping terminals
SELECT YOUR CONNECTOR
Options
SELECT YOUR OPTION
PLUG CAP Available on Plug Appliance inlet
EPDM cap to ensure IP66 rating of the plug once disconnected.
INCLINED BOX 30° Available on Socket Appliance inlet
Panel mounting polyamid inclined box for cabinets applications.
WALL BOX 30° Available on Socket Appliance inlet
Wall mounting polyamid inclined box with two-ways cable access via cable gland M20 (cable gland not supplied).
STANDARD HANDLE Available on Plug Cable coupler
Polyamid handle with integrated cable gland system for Ø8-Ø22mm cables.
HANDLE WITH CABLE GLAND Available on Plug Cable coupler
Polyamid handle with ISO M32 cable gland for Ø13-Ø32mm cables.
NEOPRENE HANDLE Available on Plug Cable coupler
Neoprene handle with multi-layer nipple and cable clamp for Ø12-Ø24mm cables.
LATCH FOR PADLOCK Available on Socket Cable coupler
Special latch drilled to allow a padlock (6 mm max.) to secure the socket in a closed or connected position.
METALLIC HANDLE Available on Plug Cable coupler
Metalic handle with integrated cable gland and cable seal adjustable to the desired cable diameter from Ø14 to Ø38 mm.
CONNECTION ASSIST HANDLE Available on Plug Cable coupler
Special handle to be installed between the connector and its handle to help the connection of the plug or cable coupler.
ALL-IN-ONE solutions
Optimize your infrastructure with custom electrical environments tailored to your unique technical and environmental challenges. Our engineering team ensures full compliance and seamless integration through expert feasibility studies and rigorous validation. Experience high-performance turnkey solutions built for maximum operational reliability.
Pre-wired connectors
For example, connectors can be supplied with a certain length of cable or directly on a reel, one end being the plug and the other beign cable lugs for junction.
Connection boxes
Technical datas
3PU Datasheet
More technical informations about the 3PU solutions.