3PX3 - 24 poles
IEC 80005-1 Annex C
Onshore power supply connector for control circuit
- Contacts max. : 23P+E
- Cable section : 1,5 mm² (AWG 16) / 2,5 mm² (AWG 14) / 6 mm² (AWG 10)
- Cable diameter : max. 42 mm
- Termination : to crimp or solder
- Dielectric withstand : 2,5 kV AC 1 min.
- Casing : AS7G (Corrosion resistant aluminium alloy)
- Contacts : Silver plated copper
- Insert : PBT (complying EN 45545-2)
- Fastenings : Stainless steel
- Temperature : -40° +120° C
- Salt spray : 96H
- Ind. protection : IP66 - IK10
3PX3
- Poles : 3P+N+4p
- Section max. : 35 mm²
- Ind. protection : IP66 - IK10
Connectors
SOCKET
Active part to be placed wall-mounted, on an electrical cabinet or on the rolling stock. Cam push/pull system to maintain IP66 when closed or help and lock the connection of a plug.
Go to options
PLUG
Mobile connector to be cabled and connected in a socket. The plug cap options are needed to ensure IP66 once disconnected.
This connector needs to be fitted with a M50 cable sealing device in order to maintain IP66.
PLUG WITH CONDUIT ADAPTOR
Mobile connector to be cabled and connected in a socket. The plug cap options are needed to ensure IP66 once disconnected.
This connector is pre-equipped with a M50 conduit adaptor.
PLUG WITH CABLE GLAND
Mobile connector to be cabled and connected in a socket. The plug cap options are needed to ensure IP66 once disconnected.
This connector is pre-equipped with a M50 cable gland.
SELECT YOUR CONNECTOR
Options
SELECT YOUR OPTION
PLUG CAP
ASG7 aluminium plug cap linked to the front of the plug by a cable to ensure IP66 rating of the plug once disconnected.
CONDUIT ADAPTOR
Conduit adaptor added to the plug or available individually to adapt a corrugated conduit.
MICROSWITCH
Sockets can be provided with a Microswitch, activated by the socket lid or the insertion of the plug.
CABLE GLAND
Cable gland added to the plug or available individually.
DUMMY SOCKET
Socket with empty insulator fitted only with pilots and codings for storing the plug away from the connections.
SELECT YOUR OPTION
ALL-IN-ONE solutions
Optimize your infrastructure with custom electrical environments tailored to your unique technical and environmental challenges. Our engineering team ensures full compliance and seamless integration through expert feasibility studies and rigorous validation. Experience high-performance turnkey solutions built for maximum operational reliability.
Pre-wired connectors
For example, connectors can be supplied with a certain length of cable or directly on a reel, one end being the plug and the other beign cable lugs for junction.
