3PS200
IEC 60309-1IEC 60947-3 IEC 60529 IEC 50102
Integrated AC23 switching capacity connector
They offer an alternative that is more compact, easier to install and use, and also safer compared to integrated connector solutions on switch boxes.
- Amp. max. : 250A
- Voltage max. : 1kV
- Amp. pilots : 30 A
- Contacts max. : 3P+N+E+2p
- Cable section max. : 95 mm² (AWG 3/0) (flexible)
- Cable diameter : min. 26 mm / max. 50 mm
- Pilot section : 6 mm² (AWG 10)
- Termination : Cable clamp screw
- Casing : Aluminium
- Contacts : Brazed silver alloy and AgNi tip
- Insert : Polyamid V0
- Fastenings : Stainless steel
- Breaking capacity : AC22=125A / AC23=100A
- Temperature : -30° +60° C
- Ind. protection : IP66/67 - IK9
- User protection : IP4X
Connectors
SOCKET
Female supplying part to be placed wall-mounted or on an electrical cabinet. No access to under voltage parts with its safety shutter.
Locking arms integrated to the socket casing for an easier plug or appliance inlet connection.
PLUG
Mobile male receiving part to be cabled and connected in a socket or a cable coupler. The plug cap option is needed to ensure IP66 once disconnected.
Go to options
CABLE COUPLER
Mobile female part to be cabled and connected in appliance inlets or plugs connectors. No access to under voltage parts with its safety shutter.
Locking arms integrated to the socket casing of the cable coupler for an easier plug or appliance inlet connection.
APPLIANCE INLET
Male receiving part to be placed wall-mounted or on an electrical cabinet. The plug cap option is needed to ensure IP66 when not connected.
Go to optionsSELECT YOUR CONNECTOR
Options
SELECT YOUR OPTION
PLUG CAP Available on Plug Appliance inlet
EPDM cap to ensure IP66 rating of the plug once disconnected.
INCLINED BOX 30° Available on Socket Appliance inlet
Panel mounting polyamid inclined box for cabinets applications.
WALL BOX 30° Available on Socket Appliance inlet
Wall mounting polyamid inclined box with two-ways cable access via cable gland M20 (cable gland not supplied).
STANDARD HANDLE Available on Plug Cable coupler
Neoprene handle with multi-layer teat and cable clamp for Ø26-Ø50mm cables.
STRAIGHT METAL HANDLE Available on Plug Cable coupler
Aluminium handle with ISO M50 cable gland for Ø25-Ø60mm cables.
ANGLED METAL HANDLE Available on Plug Cable coupler
Aluminium handle with ISO M50 cable gland for Ø25-Ø60mm cables.
2 PILOTS OPTION Available on each connector
Special contact arrangement for 6-phased connections (e.g. Star/Delta motor).
4 PILOTS OPTION Available on each connector
Special contact arrangement for 3-phased + Earth + 4 pilot connections.
ALL-IN-ONE solutions
Optimize your infrastructure with custom electrical environments tailored to your unique technical and environmental challenges. Our engineering team ensures full compliance and seamless integration through expert feasibility studies and rigorous validation. Experience high-performance turnkey solutions built for maximum operational reliability.
Pre-wired connectors
For example, connectors can be supplied with a certain length of cable or directly on a reel, one end being the plug and the other beign cable lugs for junction.
Connection boxes
Technical datas
3PS200 Datasheet
More technical informations about the 3PS200 solutions.