3PXU
IEC 60309-1* IEC 60529 IEC 50102 * (when applicable)
Cam push/pull metallic connector for Industry
- Amp. max. : 800A
- Voltage max. : 1,5kV / 110V
- Amp. pilots : 16A
- Contacts max. : 1P+2p
- Cable section max. : 300 mm² (600 MCM)
- Cable diameter : min. 14 mm / max. 62 mm
- Pilot section : 2,5 mm² (AWG 14)
- Termination : to crimp or side screw terminal
- Casing : AS7G (Corrosion resistant aluminium alloy)
- Contacts : Silver plated copper
- Insert : Polyamid
- Fastenings : Stainless steel
- Temperature : -30° +60° C
- Ind. protection : IP67 - IK10
Connectors
SOCKET
Active part to be placed wall-mounted or on an electrical cabinet. Cam push/pull system to maintain IP67 when closed or help and lock the connection of a plug.
Instead of crimping terminals
PLUG
Mobile connector to be cabled and connected in a socket or a cable coupler. The plug cap options are needed to ensure IP67 once disconnected.
Go to options
ANGLED PLUG 60°
Mobile connector to be cabled and connected in a socket or a cable coupler. The plug cap options are needed to ensure IP67 once disconnected.
Go to options
CABLE COUPLER
Mobile socket to be cabled and connected in a plug used to make an extension line.
Go to optionsSELECT YOUR CONNECTOR
3PXU variations
Options
PLUG CAP
ASG7 aluminium plug cap linked to the front of the plug by a chain to ensure IP67 rating of the plug once disconnected.
REDUCED PLUG + CABLE GLAND
Special reduced 60° angled plug casing to accept a M25 Ø11,5-Ø18mm cable gland.
MICROSWITCH
Sockets can be provided with a Microswitch, activated by opening or closing the socket lid or via the insertion of the plug.
CAPTIVE KEY LOCKING
Captive key system both on the plug and the socket to authorize electrification of the system once connected and the key engaged.
BOLT LOCKING
Bolt locking system only on the socket to authorize electrification of the system once the plug connected and the key engaged.
CABLE COUPLER CRADLE
Craddle support allowing the connector to be raised from the floor and avoid damage on the cables and the connector.
SELECT YOUR OPTION
ALL-IN-ONE solutions
Optimize your infrastructure with custom electrical environments tailored to your unique technical and environmental challenges. Our engineering team ensures full compliance and seamless integration through expert feasibility studies and rigorous validation. Experience high-performance turnkey solutions built for maximum operational reliability.
Pre-wired connectors
For example, connectors can be supplied with a certain length of cable or directly on a reel, one end being the plug and the other beign cable lugs for junction.
Connection boxes
Technical datas
3PXU Datasheet
More technical informations about the 3PXU solutions.